ROSA GALLEMI BALAGUE - ANTONIO PUIG - JOSEP MARIA PUIG PLANAS - XAVIER PUIG ALSINA - MARC PUIG GUASCH - MANUEL PUIG ROCHA - FLAMAGAS/FLAMASATS SA, 17th ISSUE

                   

                                                

Image on the left, drawing of my Invention Patent No. 278004, image on the right, Utility Model no. 175088 later by Flamagas.

DEPOSIT TRANSPARENCY

The later Flamagas Utility Model 175088 indicates that its lighter is made of a transparent material that allows the fuel content to be observed. Section 25 page 4 of his report says: "Due to the transparency of the material that makes up the aforementioned tank, it is possible to observe its fuel content at all times, which can be replenished, when it runs out, through the fuel valve. load incorporated in the lower base of the tank”.

This quality and advantage of the transparency of the gas tank was already invented and registered by me 9 years before in my Invention Patent No. 278004. Indeed, in section 25 page. 4 of the specification of said patent, the following can be read: "As for the manufacturing system described, moldable materials or plastic in general will be used to obtain the body of the tank, it will suffice to use one of said materials with a certain condition of transparency so that at all times, through the walls of the tank, the amount of cargo contained can be directly appreciated”.

The later Utility Model 175088 of Flamagas copies the quality of transparency of the gas tank that I had invented and registered 9 years earlier with my Invention Patent 278004.

REPLACEMENT OF THE PYROPHORIC STONE OF THE LIGHTER

Utility Model 175088 of the Flamagas Clipper lighter describes a system that allows the possibility of replacing the flint of the lighter once it has been consumed and as it says in its following description in section 5 on page. 6: "the possibility of being able to recharge it with fuel has been provided, as well as to replace the pyrophoric stone when it has run out" by extracting the mechanism that houses said stone. Likewise, it explains it in its Claim 14, point 10 and 15, page 44, indicating: "this device is also characterized by consisting of a cane or tubular sector with a lateral opening through which the pyrophoric stone is introduced."

Well, this mechanism had already been invented and registered by my husband Josep Escribano previously and more than 1 year before, specifically in the Certificate of Addition no. 380991 dated 6, 20, 1970 (referring to his Invention Patent 297475 attached dated 10, 3, 1964) and that it says in section 15 p. 3 of the memory, the following: "outflow, operable from the outside, in the form of a ring clamp with a serrated inner edge. The rocking lever is perforated in its middle area to allow the tube to carry the ignition stone through this perforation, and it registers this in its 3rd Claim in section 5 on page 5. 5 of his patent explaining: "which acts by compression on the tube carrying the ignition stone". Indeed we can see at point 9 of fig. of the single blade, the tube carrying the ignition stone with a spring-loaded screw that allows the replacement of said stone once it has been exhausted. Therefore, it can be confirmed that the later Utility Model 175088 of Flamagas infringes again with its 14th Claim, point 10 and 15 on page. 44, Claim 3, section 5 on p. 5 of the previous Certificate of Addition No. 380991 of my husband Josep Escribano.

               

Image on the left of my husband's Certificate of Addition No. ES380991 where we can see on the right the Stone Holder Tube with a spring and closure that allows the change of the stone when it runs out. Image on the right of the later Flamagas Utility Model 175088 where we can see the same system of Stone-Carrying Tube with spring from the Clipper that once again plagiarizes one of my Records.

OPENING LEVER FOR THE GAS OUTLET VALVE

My husband Josep Escribano in his Attached Certificate of Addition 380991 commented on 6, 20, 1970 perfects his previous Invention Patent 297475 by registering an Opening Lever for the gas outlet valve of a lighter and as stated in his 1st Claim section 15 sheet 4 as follows: "Improvements introduced in the object of invention patent number 297475 on improvements introduced in spark-producing devices for gas ignition with the container for said fluid incorporated, characterized by the fact that the incorporation of this container is It is completely carried out, being constituted by a cylindrical cavity integrated by the walls of the body of the apparatus itself, closed at its lower end with the base carrying the loading valve and at its upper end by incorporating the outlet valve from which the plunger protrudes which is actuated by the rocking lever, having said valve an actuatable regulator from the outside of the apparatus in the form of a ring with a serrated inner edge”. We can see said lever in point 7 of the single sheet drawing of his patent.

The later Flamagas Utility Model 175088 for its Clipper lighter dated later on 11, 12, 1971 claims more than 1 year later the same type and purpose of the lever for opening the gas outlet valve, as it says in the section 10 of your Claim 11th page. 42 and which we reproduce below: "Gas lighter according to claim 1 that has a lever with which the valve that contracted the gas outlet is brought to the open and closed positions." We can see said lever in fig.7 point 63 of the 2nd page of his patent. That is to say, it is the same lever that my husband Josep Escribano describes earlier.

               

                                       

                         

The two images above correspond to the annotated Patents No. 297475 and 380991 of my husband Josep Escribano where we can see the Rocker Levers that allow the opening of the Gas Outlet Valve. In the image below we see the later Flamagas Utility Model no. l75088 where we can see the same type of Rocker Lever in the upper part and that allows the opening of the Gas Outlet Valve, copying again the inventions and records of my husband.